11.4.2. Possible malfunctions of locks, drives of locks and ways x elimination
|
Fig. 10.11. The lock of a forward door (till February, 2000) and its drives: 1 — the external handle of a door; 2 — the drive of the external handle; 3 — a tip; 4 — the internal drive; 5 — laying; 6 — the socket; 7 — the button of switching off of the lock; 8 — the tip plug; 9 — draft; 10 — a drive arm; 11 — a clip; 12 — draft; 13 — draft; 14 — a lead; 15 — the lock switch; 16 — the screw; 17 — a washer; 18 — a thorn; 19 — the locking mechanism of the lock; 20 — the lever mechanism of the lock; 21 — a tip; 22 — draft
|
|
Fig. 10.11A. The lock of a forward door (after February, 2000) and its drives: 1 — the external handle of a door; 2 — the drive of the external handle; 3 — tips; 4 — the internal drive; 5 — a slip; 6 — the socket; 7 — the button; 8 — the tip plug; 9, 12, 13 and 23 — drafts; 10 — a drive arm; 11 — a clip; 14 — a lead; 15 — the lock switch; 16 — a plate of fastening of the switch of the lock; 17, 18 — screws; 19 — a lock clamp; 20 — the locking mechanism of the lock; 21 — the lock mechanism lever; 22 — a draft tip; 24 — a cover
|
|
Cause of defect
|
Way of elimination
|
|
The door is not closed or closed only give to drink a vigorous push
|
|
|
At installation the thorn of a clamp of the lock of a door is shifted in a cabin
|
To weaken fastening of a thorn and to nominate him outside to 1-2 mm
|
|
Adjustment of the external or internal drive of the lock is incorrectly executed
|
To check separately correctness of adjustments of the external and internal drive
|
|
The door is not blocked outside, from within the car
|
|
|
Adjustments of the external or internal drive are incorrectly executed
|
To execute separately necessary adjustments and to check operation of mechanisms of blocking
|
|
The door is not closed completely (only on safety tooth)
|
|
|
The buffer of the locking mechanism prevents movement of a rotor of the lock
|
To put a rotor into place or to replace the locking mechanism
|
|
The external handle of a door does not work
|
|
|
To replace the external handle.
To replace a tip or the drive
|
|
|
The external handle does not come back to a starting position after opening
|
|
|
Jam drive levers
|
To weaken a rivet of levers, to grease the drive and to check its work, in case of unsatisfactory result - to replace the drive
|
|
The locking mechanism of the lock does not work
|
|
|
Movement (turn) of a rotor and cam of the lock is complicated
|
To replace the locking mechanism
|