6.4.7. Dismantling of differential

Dismantling of differential needs to be made in the following order:
- to turn off bolts of fastening of the conducted gear wheel, to remove the conducted gear wheel;

Fig. 5.38. Removal of an internal ring of the bearing from a differential box: 1 — an insert; 2 — a support; 3 — a nut; 4 — a thrust bearing; 5 — the stripper screw




— to press internal rings of bearings of differential by means of a stripper assembled with inserts, as shown in fig. 5.38. In order that zaplechik of inserts 1 entered dredging on a differential box, it is necessary to squeeze support 2 bolts with nuts 3; to press a bearing ring rotation of the screw 5.