cf5601ce

6.4.5. Removal of the bridge from the car

Removal of the bridge from the car needs to be made in the following sequence:
- to weaken nuts of fastening of back wheels;
- to disconnect the driveshaft from a flange of the leading gear wheel;
- to disconnect cables of the drive of the parking brake from the equalizer;
- to disconnect a hose of the brake system, to remove brake tubes;
- to disconnect the lower end of a rack of the regulator of brake forces from an arm of the back bridge;
- to substitute an emphasis under forward wheels of the car, to hang out the back bridge and to establish it on the supports providing a steady position of the car;
- to turn off nuts of fastening of wheels and to remove wheels;
- to disconnect shock-absorbers;
- to turn off nuts of fastening of step-ladders of springs, to remove step-ladders and arms of the stabilizer;
- to hang out a back part of the car with the help the crane beam and to put forward the bridge from under the car.