cf5601ce

7.5.3. Repair of a beam of a forward suspension bracket and steering drafts

The forward axis is removed from the car in the following sequence:
- to weaken nuts of fastening of wheels. To raise a forward part of the car to a separation of wheels from a floor and to establish support under a forward part;
- to remove forward wheels;
- to turn off a nut of fastening of a spherical finger of longitudinal thirst for a bipod of the steering mechanism and to disconnect draft;
- to disconnect the lower ends of shock-absorbers from a front axle beam. To bring a jack under a beam, to turn off nuts of step-ladders of springs and to remove a forward axis from the car.
Installation of a beam is made in the return sequence.